Top View of Finished Rack


Top View of Rack

This is a photo of the top left end of the rack, showing the support structure for the boiling kettle and its burner. You can see how the burner support is mounted to the rear left leg of the rack at a 45 degree angle toward the center. As I mentioned in the main document, if I were to do this part again, I'd make the center square about 2" bigger on each side (that would make it 8" square) to get the steel tubing farther away from the burner flame - as it is now, the tubing gets red hot after running the burner for about 15 minutes.

Return to Main Document

Last Modified 10/07/96
Copyright 1996, Marty Tippin (martyt@pobox.com)